|
|
|
Flexible Stainless Steel Corrugated Water Connectors
Water Dealer Specifications: Parts, Connectors: Hague Quality Water
Often imitated, never equaled!
Corrugated Stainless Steel Flexible
Water Purification / Softener Connectors for Hague Quality Water
Specification Sheet
We recommend the use of Dow 111 or similar, non-toxic silicone based lubricant on washers for all installations.
Caution: When connecting to a copper male adaptor or brass nipple, make sure to file any sharp edges which may contact and damage washer causing leaks.
Note: Manufacturer assumes no responsibility for failure due to improper installation.
| SPECIFICATION: | COMPLIANCES/LISTINGS: |
|---|
Furnish and install Corrugated Stainless Steel
Full Port Water Softener Connectors
|
* IAPMO Listed
* UPC, cUPC, IPC
*ASME A112.18.6
*IAPMO Certified to NSF ANSI Section
61 |
- DESIGN FEATURES: Mega-flow SUPER Water-flexTM
- 304 Series Stainless Steel
- No reduction necessary for easiest installation
- Flows 135% more than braided type
- Maintains optimum flow - no restriction
- Operate appliance at maximum efficiency
- Kink and Crimp Free
- Chrome plated brass nuts
- Extremely Flexible
- Will not corrode or rust
- No Dielectric union required
- Highest Quality EPDM washer
- Resists work hardening
- Working pressure 200 psi
- Burst pressure 1800+ psi
- 100% Leak Tested
- No Sweat Installation
- Lifetime Guarantee
- Temperature rating 40 - 250 degrees F
- Custom Design - Installs Direct from Appliance to Supply line
|
| Model # | Description | Length |
|---|
| SWC-114 x 1" |
*1 1/4" FIP x 1" FIP
1" tube with Hague 1 1/4" FIP x 1" FIP |
12", 15", 18", 24" |
| SWC-114 x 3/4" |
*1 1/4" FIP x 3/4" FIP
3/4" tube with Hague 1 1/4" FIP x 3/4" FIP |
15", 18", 24" |
| SWC-114 |
* 1 1/4"FIP x 1 1/4"FIP
1 1/4" tube with Hague 1 1/4" FIP x 1 1/4" FIP |
18", 24" |
*Special Hague 1 1/4 FIP nut is 6mm longer to correctly fit the Hague Water max
bypass.
Designed and manufactured specifically to save time & money on the installation without reducing the flow! |
|
|
|
Product Submittal
Job Name:
Date:___________________
Model#__________________ Quantity:_________
Architect/Contractor:_____________________________________
|
|
|